…if you change the name of your Wifi network you will give your OD-11 a headache!
Once the network name is changed, the OD-11 can no longer connect to the network, it constantly searches for the old network name (& never finds it). From the manual you need to connect to the OD-11 via wifi to reset, which you won’t be able to do because it can’t find your network!
Luckily TE support were very quick to respond. I had to restart the OD-11 & press + & - buttons at the same time. This effectively resets previous wifi connection & creates an emergency network from the OD-11. From there I could connect via a URL with the laptop & upload a fresh firmware version which completely reset the speaker…thus able to connect to the newly named network.
It would be lovely if you could do this all within the app or via Orthoplay website.
Thought I’d share in case anyone else tried resetting their wifi network name.
Speaking of OD-11. One thing that I really miss is the ability to change source with the ortho remote. Say for example that when you press and hold it down it changes source one step. Maybe something they add in the future.
I’d like to comment/answer a few different things here.
First, if changing network name/access point/router, there is no need to perform a recovery flash - simply put the OD-11 in config mode (https://teenage.engineering/guides/od-11#config) and configure it to use the network. Much more simple and quick.
If, for whatever reason, you want to perform a recovery flashing, please use this link instead: http://www.orthoplay.com/latest/firmware , it always points to the latest firmware binary.
Regarding changing OD-11 input source using the ortho remote - that has been working for a couple of months if running a recent firmware on the ortho remote. Simply press and hold the button to toggle between the sources. Ping me to get instructions on how to upgrade it.