Low Speaker volume

Hi all -


Jut turned on my OP-1 for the first time in a couple of weeks and the speaker volume seems to have dropped to something barely audible even when the volume is set to max. Headphone volume seems okay still but the volume through the speaker seems really really low.

Just wondering if anyone else has experienced this?

I suspect I am going to have to send it back to TE for a repair (I really hope). Does any one know how quickly their turnaround time is?

Many thanks all.

could be an effect left on. could be turned down in mixer or on the master left right output controls. maybe drive is set too low.

Hi -


Many thanks for the suggestions.
- I’ve checked the effects (all are off).
- I thought he Mixer only effected the tape (which I am not currently using)
- Not too sure about where the Drive and Master left + right output controls are set (but would these effect the general output volume in any case)?


@masterofstuff124


Investigating further thanks to your suggestions I managed to work out that somehow the EQ settings in the mixer section were all set to very low values (not sure how this happened) with the result that the output was severely attenuated.

Panic over - phew.

Thanks for the hints which helped to put me on the right path. :slight_smile:

1 Like